Products Series | Milling Machine

 
 
LC-205 Series  DC SERVO MILLING MACHINE
 

 

CONTROL PANEL
QUILL AND HOUSING (2G) X,Y AXES TRANSMISSION SYSTEM


SPECIFICATION
Machine Type LC-205
VS		 LC-205 VN LC-205
VSD		 LC-205
VHS		 LC-205
VHDX		 LC-205 VHDN LC-205 VHD
Travel　
Longitudinal Power feed: 815mm (32") / Manual:  835mm(32.8") 835 mm (32.8")
(Manual Max.)		 Power feed:
815mm (32")/ 
Manual: 835mm(32.8")		 835 mm (32.8")
(Manual Max.)
Cross 380 mm (15")
Vertical 460 mm (18") 435 mm (17.12")
Table　
Working surface 1,300 mm X 300 mm (51" X 11.8")
Working surface to ground A01 935 - 1,395 mm (36.8 - 54.9") 935 - 1,370 mm (36.8 - 53.9")
Max. loading 200 Kg
T-slots (no. x width x pitch) 3 X 15.875 mm X 63.5 mm
Machine size
Length A02 2,400 - 2,870 mm (94.5 - 113")
Width A03 2160 mm (85")
Height A04 2,310 (90.9")
Weight 1,800 kgs (3,960 lbs) 2,010 kgs (4,422 lbs)
Coolant pump O 1/8 HP
Vertical Spindle
Milling head 20 VS 20 VN 2 G 20 VS 20 VS 20 VN 2 G
Quill swivel (R&L/90°) B01 V V V V V V V
Quill swivel (F&B/45°) B02 V V O V O O O
Spindle nose to table surface B03 80~540mm  80~540 mm 40~500 mm 115~550mm 115~550 mm 75~510 mm 75~510 mm
(3-21.3") (3-21.3") (1.5-19.6") (4.5-21.7") (4.5-21.7") (2.9-20") (2.9-20")
Spindle nose to column surface B04 355~825 mm (14"~32.5") 355~825 mm (14"~32.5")
Overarm travel B05 470 mm (18.5") 470 mm (18.5")
Overarm Swivel 360° 360°
Feed system
Longitudinal O 22~690mm (0.8"~27.2")/ min O 22~690mm (0.8"~27.2")/ min
Longitudinal rapid feed 2100mm (82.7")/ min 2100mm (82.7")/ min
Vertical 800mm (31.5")/ min 800mm (31.5")/ min
Longitudinal motor 1, (2) HP / 4 (8) P 1, (2) HP / 4, (8) P
Vertical motor 1.5 HP 6P 1.5 HP 6P
Longitudinal motor (DC Servo/ 4.5Nm) X X V X V V V
Cross motor (DC Servo/ 4.5Nm) X X V X V V V
Horizontal spindle　
Spindle
speed		 50 HZ X 45~980 rpm (6 step)
60 HZ X 55~1,180 rpm (6 step)
Motor X 5 HP 4P
Spindle taper X NST 40
Spindle centerline to table C01 X -25~410 (-1"~16.1")
Spindle centerline to overarm  C02 X 146 (5.7")
Spindle centerline to column surface C03 X 28 (1.1")
 
 
20VS Head
20VN
2G Head

Milling head specification　
Milling Head 20 VS  20 VN 2G
Spindle Taper NST 40 NST 40 NST 40
Spindle Motor(3Ph) 3 HP 3 HP 5 HP
Quill Diameter 90 mm 90 mm 110 mm
Quill Travel 127 mm (5 ") 127 mm (5") 135 mm (5.3")
Vertical Feeds 0.04/0.08/0.16 mm 0.04/0.08/0.16 mm 0.035/0.070/0.14 mm
Spindle Speed 50 HZ 50~3,750 rpm (Variable) 60-3,000 rpm (16 Steps) 60-3,000 rpm (16 Steps)
60 HZ 60~4,500 rpm (Variable) 75-3,600 rpm (16 Steps) 75-3,600 rpm (16 Steps)
Inverter (Option) X O O
Bigger spindle motor (Option) 5 HP 5 HP X
Single phase motor (Option) X X X
2 speed motor (Option) X O O

Accessories
Machine Type LC-205
VS		 LC-205
VN		 LC-205
VSD		 LC-205
VHS		 LC-205
VHDX		 LC-205
VHDN		 LC-205
VHD
X & Y axis ball screws (grade C5) O O O O O O O
X & Y Axis power feed O O X O X X X
Z-Axis servo motor feed X X O X O O O
Table guard put on top table (500*1300*250) O O O O O O O
Coolant system O O O V V V V
Coolant tray O O O V V V V
Automatic Lub. System O O V O V V V
Halogen light    O O O O O O O
5"(127mm) riser block O O O O O O O
Tapping Unit  O O O O O O O
Dial Gauge on Quill X X O X X X O
* Specifications may different according to option accessories and are subject to change without notice.
V: Standard ; O: Option ; X: Not Available
Edition / A04
HOME   |    PROFILE   |    PRODUCTS   |    E-MAIL

No 52, Charn An E. Rd. TAIPING, TAICHUNG TAIWAN, R.O.C.
Tel:886-4-23921001   Fax:886-4-23921037