Products Series | Machining Center | Box Way

 
 
MCV850 / MCV1100  VERTICAL MACHINING CANTER
 
 
  • MEEHANITE cast iron for all major machine parts.
  • Export and precision scraping.
  • 3-Axis ball screws preload.
  • Automatic central lubrication
    system.
  • Rigid 8000 rpm spindle unit.
  • High efficiency.
  • Excellent and stable accuracy.
  • Fully enclosed splashguard
    for elegant outlook.
 

STANDARD SPINDLE

  • Rigid 8000 rpm spindle unit.
  • Easy for after service.
  • High accuracy.
  • Cool jet around spindle.
  • Bearing size: 7014.
   

EXPERT AND PRECISION SCRAPING

  • MEEHANITE cast iron for all major machine parts.
  • The major structural parts are scuentifically rib reinforced and annealed to relieve stress for outstanding stability of material.
  • Box type slideways with long lasting accuracy even under heavy cutting and high-speed machinery operation.
  • Extra heavy design on column and base.
  • The enhanced ribs in major construction parts provide the super rigidity and precise spindle for high-speed cutting.
  • Top open front door design. Operator can get closer to table, which makes setup easier.

The sliding surface are coated with precisely scraped TURCITE-B antifriction lining materal. It is carefully hand scraped to achieve high accuracy and good retention of lubricating oil essential for a long accurate life.

3-AXIS BALL SCREWS PRELOAD

  • The ball screws are preload and directly driven with servo motors to absolutwly eliminate backlash between bearings and ball screws exhibiting excellent feeding accuracy.
  • All axes are with high precision C3 grade ball screws.
  • Ball screws diameter X: 40mm Y.Z: 45mm.

24 TOOLS MAGAZINE (OPTION)

  • Random tool selection, strongly provide stable quality and precision.

 
SPECIFICATION
MODEL
MCV850
 MCV1100
Travel
X-Axis
850 mm(33.5")
 1100 mm(43.3")
Y-Axis
600 mm(23.6")
Z-Axis
100~660 mm(22.0")
Spindle nose to table
70 - 530 mm(3.9-25.9")
Table
Table size
1050mm x 600mm(41.3-23.6") 
 1300mm x 600mm(51.1-23.6") 
Floor to table
835 mm(33.6")
Max. table loading capacity
1000 kgs(2200Lbs)
T-slot (no x Width x Pitch)
6 x 18 x 100 mm ( 6 x 0.7" x 3.9" )
Spindle center to column
652 mm(25.6")
Feed system
Rapid traverse speed 
X/Y: 20 M/min ( 787.4"/min) , Z:15 M/min (590.6"/min)
Feed motor(FANUC)
X: 1.8kW (12Nm) , Y: 3.0kW (22Nm), Z: 4.2 kW(30Nm)
Ball screw diameter & pitch
X: 40 mm, Y/Z: 45 mm / 10 mm(0.39")
Cutting feedrate
1-10,000 mm/min (0.04 - 393.7"/Min)
Type of transmission
Direct Drive
Spindle
Type of tool shank
ISO 40
(BT/CAT/DIN 69871A)
ISO 50
(BT/CAT/DIN 69871A)		 ISO 40
(BT/CAT/DIN 69871A)		 ISO 50
(BT/CAT/DIN 69871A)
Max. spindle speed
8,000 rpm / 10,000 rpm (Op)
6,000 rpm / 8,000 rpm (Op) 8,000 rpm / 10,000 rpm (Op) 6,000 rpm / 8,000 rpm (Op)
Spindle motor
75/11 kW / 11/15 kW (Op)
15/18.5 kW / 22/26 kW (Op) 75/11 kW / 11/15 kW (Op) 15/18.5 kW / 22/26 kW (Op)
Type of transmission
Belt
ATC
Tool storage capacity
20T/24 or 32 or 40T (Op)
24T / 30T (Op)
20T/24 or 32 or 40T (Op)
 24T / 30T (Op)
ATC type
Armless type (Op)
Armless type
Armless type (Op)
 Armless type
Max. tool diameter
100/95/76/76 mm (3.9/3.7/3/3.3")

110/127 mm (4.3/5")

100/95/76/76 mm (3.9/3.7/3/3.3")
 110/127 mm (4.3/5")
Without adjacent tool
180/185/127/127 mm (7.1/7.3/5/5")
 200/228 mm (7.9/9")
180/185/127/127 mm (7.1/7.3/5/5")
 200/228 mm (7.9/9")
Max. tool length
300 mm (11.8")
300 mm (11.8")
300 mm (11.8")
 300 mm (11.8")
Max. tool weight
7 kg (15Lbs)
 15 kgs (33Lbs)
7 Kg (15Lbs)
15 kgs (33Lbs)
Tool changing time
(Tool to Tool)
7 sec / 3.5 sec
 5 sec
7 sec / 3.5 sec
 5 sec
Tool changing time
(Chip to Chip)
11 sec / 5.5 sec
 7 sec
11 sec / 5.5 sec
 7 sec
Method of tool selection
20T by address code / Random selection
bi-directional magazine rotation
Tool display
Yes
Special tool management
Yes
Coolant system
Coolant tank size
486 L 　
Coolant capacity
105 L / min
Chip Flush capacity
105 L / min
Machine size
Machine height
2,600 mm 102.3")
 2,900 mm 114.7") 2,600 mm 102.3") 2,900 mm 114.7")
Floor space
2,540x2,190 mm (100x86.2")
 2,920x2,190 mm (115x86.2")
weight
7,200 kgs (15840Lbs)
7,500 kgs (16500Lbs) 7,400 kgs (16280Lbs) 7,700 kgs (16940Lbs)
Power source
Electrical power supply
25 KVA/3PH, ，220V 50/60HZ
Compressed air supply
6.0 kgf/c㎡ (85psi) (0.6MPa)
Controller
 
FANUC / HEIDENHAIN / SIEMENS
Edition / A08
* Specifications may different according to option accessories and are subject to change without notice.
Standard accessories
● (#40) Armless type ATC (20Tools)
● (#50) Arm type ATC (24Tools)
● (#40) 8,000 rpm spindle (Belt type)
● (#50) 6,000 rpm spindle (Belt type)
● Automatic lubrication system
● Portable electronic handwheel (FANUC)
● Working light
● Alarm light
● Spiral type chip conveyor
● Coolant gun
● Spindle coolant system
Optional accessories

● (#40) Arm type ATC (24 or 32 or 40 Tools)
● (#50) Arm type ATC (30 or 40 Tools)
● (#40) 10,000 rpm spindle (Belt type)
● (#50) 8,000 rpm spindle (Belt type)
● Spindle chiller
● Preparation for coolant through spindle system
● Coolant through spindle system
● Spindle air blow
● Flat type chip conveyor
● 4th or 4+5th axis rotary table
● Heidenhain 3-Axis linear scale
● Working piece measurement system
● Tool length measurement system
● Heat exchanger on electrical cabinet
● Power transformer
● CE (Safety door interlock)
● Air gun
HOME   |    PROFILE   |    PRODUCTS   |    E-MAIL

No 52, Charn An E. Rd. TAIPING, TAICHUNG TAIWAN, R.O.C.
Tel:886-4-23921001   Fax:886-4-23921037