Products Series | Machining center | Box Way

 

 
MCV300  VERTICAL MACHINING CANTER
 

CARTRIDGE SPINDLE

  • Well balanced, rigid and easy ,maintenance, which is built in temperature controlled environment. Spindle, bearings, housing and spacer are individually selected in-house before put it together. Each unit is running test to ensure performance and accuracy before being assembled into the machine.

MEEHANITE CASTING STRUCTURE

  • Certified Meehanite cast iron formed a steady foundation as a rock. Heavy ribbed throughout for high rigidity and excellent mechanical and thermal stability.

RIGID BOX WAY

  • The sliding surface are coated with Turcite-B antifriction lining materal.
    It is carefully hand scraped to achieve high accuracy and good retention of lubricating oil, essential for a long accurate life.

CHIP FLUSH SYSTEM

  • A simple but efficient removal emchanism could be easily conveying chips outside the machine.

HEAVY LOAD TABLE

  • AHigh rigid-design structure, and is with max. loading 350 kgs.

TOP OPEN FRONT DOOR

  • Operators can get closer to the table, which makes setup easier.

AUTOMATIC TOOL CHANGER

  • The armless type transmission mechanism provides rapid, stable and reliable tool change, also it is controlled by PLC software for quicker tool selection to reduce non-cutting time. The standard capacity is 10 tools, but coild be operation with 16 tools or Armtype with 24 tools.
 
SPECIFICATION
MODEL
MCV300
Travel
X-Axis
610 mm(24")
Y-Axis
305 mm(12") / 355 mm(14") OP
Z-Axis
460 mm(18.1")
Spindle nose to table
70 - 530 mm(2.8-20.9")
Table
Table size
700 mm x 308 mm(27.6-12.1") / 700 x 350 mm (27.6-13.78") OP
Floor to table
835 mm(32.9")
Max. table loading capacity
350 kgs(770Lbs)
T-slot (no x Width x Pitch)
4/5(OP) x 16mm x 63.5 mm ( 4/5(OP) x 0.6 x 2.5" )
Spindle center to column
415 mm(16.3")
Feed system
Rapid traverse speed 
X/Y: 20 M/min ( 787.4"/min) , Z:18 M/min (708.7"/min)
Feed motor(FANUC)
X/Y: 1.2kW (8Nm) , Z: 1.8kW (12Nm)
Ball screw diameter & pitch
32 mm / 10mm (1.3" / 0.4")
Cutting feedrate
1-10,000 mm/min (0.04 - 393.7")
Type of transmission
Direct Drive
Spindle
Type of tool shank
BT 40 / CAT 40 / DIN 69871A
Max. spindle speed
8,000 rpm / 10,000 rpm (Op)
Spindle motor
5.5 / 7.5 kW / 7.5 / 11 kW (Op)
Type of transmission
Belt
ATC
Tool storage capacity (Arm-Less)
10 tools
16 tools (Op)
24 tools (Op)
ATC type
Armless type
Armless type
Max. tool diameter
120 mm (4.7")

93 mm (3.7")

76 mm (3")
Without adjacent tool
150 mm (5.9")
120 mm (4.7")
Max. tool length
300 mm (11.8")
230 mm (9.1")
Max. tool weight
7 kg (15Lbs)
7 Kg (15Lbs)
Tool changing time (Tool to Tool)
2 sec
3.2 sec
Tool changing time (Chip to Chip)
8.1 sec
 5.5 sec  
Method of tool selection
By address code
random selection
bi-directional magazine rotation
Tool display
None
Special tool management
Yes (except FANUC 0l-Mate D)
Coolant system
Coolant tank size
160 L  
Coolant capacity
150 L / min
Chip Flush capacity
Standard
Machine size
Machine height
2,400 mm (94.5")
Floor space
1,850 mm (72.8")(W) x 1,825 mm (71.9")(D)
weight
2,500 kgs (5500Lbs)
Power source
Electrical power supply
15 KVA/3PH, 220V 50/60HZ
Compressed air supply
6.0 kgf/c㎡ (85psi) (0.6MPa)
Weight 2500 kgs (5500 Lbs)
Controller
  FANUC / HEIDENHAIN / SIEMENS
Edition / A05
* Specifications may different according to option accessories and are subject to change without notice.

Standard accessories
Armless type ATC (10Tools)
8,000 rpm spindle (Belt type)
Automatic lubrication system
Portable electronic handwheel (FANUC)
Working light
Alarm light
Spindle coolant system
Drawer type chip collector
Optional accessories
Armless type ATC (16Tools) or Arm type ATC (24 tools)
High-speed Spindle 10,000 rpm
Spindle chiller
Spiral or flat type chip conveyor
4th or 4+5th axis rotary table
Working piece measurement system
Tool length measurement system
Heat exchanger on electrical cabinet
Power transformer
CE (Safety door interlock)
Coolant through spindle system
Coolant gun
Air gun
Spindle air blow
Oil skimmer
Door lock
Riser block 200mm
HOME   |    PROFILE   |    PRODUCTS   |    E-MAIL

No 52, Charn An E. Rd. TAIPING, TAICHUNG TAIWAN, R.O.C.
Tel:886-4-23921001   Fax:886-4-23921037